Buying used double arm mixers through International Process Plants gives rubber, adhesive, sealant, and heavy-paste manufacturers and others access to heavy-duty kneaders built around two counter-rotating sigma or Z-type blades working inside a W-shaped trough from Baker Perkins, JH Day, Werner & Pfleiderer, and other OEM manufacturers.
IPP stocks double arm mixers across multiple material options. Choose the material that matches your process requirements.
IPP stocks carbon steel double arm mixers. Available from Baker Perkins, JH Day, Werner & Pfleiderer and other manufacturers.
Used Baker Perkins 20 TUEM carbon steel double arm mixer with 3,300 L (875 gallons) capacity, dual sigma blades, and hydraulic tilt discharge.
Used JH Day carbon steel double arm mixer with 2,100 L (550 gallons) capacity, double nobben blades at 30 RPM, and hydraulic tilt discharge.
IPP stocks stainless steel double arm mixers in grades including 304, 316, 321, and Other. Available from Baker Perkins, JH Day, Werner & Pfleiderer, Fritz Meili (Zurich), Morton-Duplex, and Guittard.
Used JH Day Mogul stainless steel 304 double arm mixer with 946 L (250 gallons) capacity, cored dispersion blades at 45.3 RPM, and stainless steel 304 jacket rated to 8.6 bar (125 psi).
Used Werner & Pfleiderer UK14HS stainless steel 304 clad double arm mixer with 450 L (118.9 gallons) capacity, cored dispersion blades, vacuum capability, and jacket rated to 10.1 bar (146 psi).
IPP stocks additional double arm mixers where the contact-surface material is not separately specified in the product record. Available from Werner & Pfleiderer.
Used Werner & Pfleiderer double arm mixer with 500 L (132.1 gallons) capacity, carbon steel Z blades, jacket rated to 17.7 bar (256.1 psi), and hydraulic tilt discharge.
IPP stocks double arm mixers from a wide range of manufacturers, with Baker Perkins, JH Day, and Werner & Pfleiderer representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure, replacement parts, and operator familiarity.
Baker Perkins is the deepest single-manufacturer position in IPP's double arm mixer inventory. Available in carbon steel, stainless steel 304, stainless steel 321, and stainless steel other construction.
Used Baker Perkins M85SL stainless steel 304 double arm mixer with 852 L (225 gallons) capacity, cored dispersion blades at 42 RPM, and carbon steel jacket.
Used Baker Perkins 20 TUEM stainless steel double arm mixer with 3,300 L (875 gallons) capacity, sigma blades at 25.5 RPM, vacuum capability, and jacket rated to 8.6 bar (125 psi).
JH Day (now part of B&P Littleford) is a legacy manufacturer of heavy-duty kneading equipment. IPP stocks JH Day double arm mixers including the Mogul series in carbon steel and stainless steel 304 construction.
Used JH Day Mogul stainless steel 304 double arm mixer with 946 L (250 gallons) capacity, cored dispersion blades at 45.3 RPM, and stainless steel 304 jacket rated to 8.6 bar (125 psi).
Used JH Day Mogul carbon steel double arm mixer with 2,100 L (550 gallons) capacity, double nobben blades at 30 RPM, and tilt discharge with packing seal.
Werner & Pfleiderer (now Coperion) is a legacy manufacturer of high-torque kneading equipment. IPP stocks Werner & Pfleiderer double arm mixers in carbon steel and stainless steel construction with Z-blade and sigma-blade configurations.
Used Werner & Pfleiderer Universal-17-X-E3 stainless steel 316 double arm mixer with 946 L (250 gallons) capacity, sigma blades, vacuum capability, and carbon steel jacket rated to 9.8 bar (142.3 psi).
Used Werner & Pfleiderer UK14HS stainless steel 304 clad double arm mixer with 450 L (118.9 gallons) capacity, cored dispersion blades, vacuum capability, and jacket rated to 10.1 bar (146 psi).
Used Werner & Pfleiderer carbon steel double arm mixer with 500 L (132.1 gallons) capacity, Z blades, jacket rated to 17.7 bar (256.1 psi) at 230 °C (446 °F), and hydraulic tilt discharge.
IPP also stocks double arm mixers from Fritz Meili (Zurich), Morton-Duplex, and Guittard. Contact IPP for additional manufacturers and availability.
Used Fritz Meili (Zurich) stainless steel 316 clad double arm mixer with 1,400 L (369.8 gallons) capacity, sigma blades at 168 RPM, and jacket rated to 5.1 bar (73.5 psi).
All double arm mixers currently in IPP's inventory are in used condition. These units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining OEM trough and drive hardware.
Good used double arm mixers represent the full condition position in IPP's current inventory. These units were previously installed in production service and are offered with original OEM trough, blades, and drive components.
Used Baker Perkins 20 TUEM carbon steel double arm mixer with 3,300 L (875 gallons) capacity, dual sigma blades at 25.5 RPM, vacuum capability, and jacket rated to 8.6 bar (125 psi).
Used Werner & Pfleiderer Universal-17-X-E3 stainless steel 316 double arm mixer with 946 L (250 gallons) capacity, sigma blades, vacuum capability, and jacket rated to 9.8 bar (142.3 psi).
Used Fritz Meili (Zurich) stainless steel 316 clad double arm mixer with 1,400 L (369.8 gallons) capacity, sigma blades at 168 RPM, and jacket rated to 5.1 bar (73.5 psi).
Buying used double arm mixers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new double arm mixers compare across key factors.
| Factor | Used from IPP | New (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new fabrication) |
| Available Capacities | 6 L (1.59 gallons) to 3,300 L (875 gallons) (multiple units in stock) | Custom-built to specification |
| Materials | Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel Other | Custom-specified |
| Manufacturers | Baker Perkins, JH Day, Werner & Pfleiderer and others | Single OEM |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver double arm mixers ready for your process.
Buying used double arm mixers from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Request a QuoteIn-stock double arm mixers from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.
Check AvailabilityIPP stocks double arm mixers from Baker Perkins, JH Day, Werner & Pfleiderer, Guittard and other manufacturers. Every unit is an original OEM product with traceable provenance.
Browse ManufacturersIPP offers refurbishment services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts.
Learn MoreIPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
Find Nearest OfficeMaterials include Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel Other. Capacities from 6 L (1.59 gallons) to 3,300 L (875 gallons).
Talk to an ExpertThe process of purchasing used double arm mixers from IPP follows five steps, from specification to delivery.
Share your specifications: capacity, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.
IPP sends a detailed equipment data sheet with specifications, dimensions, condition report, and photographs.
Contact IPP to arrange an on-site visit or request a live video walkthrough with an IPP team member at one of our global locations.
IPP offers refurbishment services through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional services.
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries.
Answers to the most common questions from procurement and operations teams evaluating used double arm mixers.
IPP Group supplies new equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. IPP also offers re-glassed equipment through its UGE (Universal Glasteel Equipment) division.
Ask About New Equipment