Buying used nutsche filters through International Process Plants gives chemical, pharmaceutical, food and beverage, and environmental wastewater operators access to jacketed agitated pressure vessels that combine cake filtration, washing, and drying inside a single sealed enclosure from JENS OLSEN, Seitz-Werke, Wollner & Platz, Pfaudler, and other OEM manufacturers.
IPP stocks nutsche filters across multiple material grades, including Stainless Steel 316, Stainless Steel Austenitic, and Glasslined construction. Choose the material that matches your process chemistry and corrosion requirements.
IPP stocks stainless steel nutsche filters in both 316 and austenitic grades, suited to corrosive solvents, sanitary process duty, and elevated-temperature drying. Available from JENS OLSEN, Seitz-Werke, Seitz, Wollner & Platz, and Von Roll (Switzerland).
Used Von Roll (Switzerland) stainless steel 316 nutsche filter with 6 m² (64.6 ft²) filtration area, 2,800 mm (110.2 in) vessel diameter, and rake agitator for cake smoothing and discharge.
Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, jacketed pressure-and-vacuum service, and 1,900 mm (74.8 in) vessel diameter.
Used Seitz EF-100.300-CW stainless steel 316 nutsche filter with 0.85 m² (9.1 ft²) filtration area, 6 bar pressure rating, and jacketed body for hot-oil or steam drying.
IPP stocks Pfaudler glass-lined nutsche filters for highly corrosive acids, chlorinated solvents, and pharmaceutical intermediates that demand a non-reactive contact surface. Glass-lined construction protects the vessel and the product from metal pickup during long filtration and drying cycles.
Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, 232.2 °C temperature rating, and a stainless steel 316 jacket rated to 10.3 bar for high-pressure steam.
IPP also lists nutsche filters whose primary material grade is not separately classified, typically jacketed shells suited to a range of utility duties. Contact our team for the latest material certifications and condition reports on these units.
Used nutsche filter with 889 mm (35 in) vessel diameter and a stainless steel 316 jacket, mounted on four lugs and ready for re-piping into a process line.
IPP carries nutsche filters from a wide spread of OEM builders, with JENS OLSEN and Seitz-Werke representing the deepest named positions in current inventory. Buying from a recognized OEM helps ensure spare-part availability, plate and gasket compatibility, and operator familiarity with the discharge mechanism.
JENS OLSEN is one of the deepest named OEM positions in IPP's nutsche filter inventory. Available units include jacketed stainless steel 316 vessels in pressure-and-vacuum configurations with hydraulic raker agitators.
Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, vacuum-rated jacket, and 1,000 mm (39.4 in) straight side length for deep cake handling.
Used JENS OLSEN stainless steel 316 nutsche filter with 1.75 m² (18.8 ft²) filtration area, mounted in two A-frames, and a jacketed shell rated for 2 bar service.
Seitz-Werke is another deep OEM position in IPP's nutsche filter listings. Available model series include the small-batch 60/1 and the EF100-500-CW pressure filter.
Used Seitz-Werke 60/1 stainless steel austenitic nutsche filter with 0.3 m² (3.2 ft²) filtration area, 0.12 m³ cake volume, and half-pipe limpet jacket for thermal control during drying.
Used Seitz-Werke EF100-500-CW stainless steel 316 nutsche filter with 200 °C temperature rating, dished and clamped heads, and four-leg base for floor mounting.
Beyond JENS OLSEN and Seitz-Werke, IPP also lists nutsche filters from Pfaudler, Wollner & Platz, Von Roll (Switzerland), and Seitz. These units span small-batch glass-lined service through high-area cake handling for industrial duty.
Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, elliptical clamped heads, and a 232.2 °C jacket rating for high-temperature drying duty.
Used Von Roll (Switzerland) stainless steel 316 nutsche filter with 6 m² (64.6 ft²) filtration area, 2,800 mm (110.2 in) vessel diameter, and rake agitator for industrial cake duty.
Used Wollner & Platz stainless steel austenitic nutsche filter rated for 300 °C (572 °F) internal temperature, with sight-glass nozzles and jacket rated to 8 bar.
IPP currently lists nutsche filters in used condition. Each unit was previously installed in production service, inspected on intake, and is offered with traceable IMS records.
Used nutsche filters are the entire current condition position in IPP's listings. These vessels carry their original OEM filter plates, jackets, and discharge hardware, and are offered as-is at the lowest price point.
Used Von Roll (Switzerland) stainless steel 316 nutsche filter with 6 m² (64.6 ft²) filtration area, 2,800 mm (110.2 in) vessel diameter, and rake agitator.
Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, jacket rated to 10.3 bar, and 232.2 °C internal temperature rating.
Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, vacuum service rating, and 1,900 mm (74.8 in) diameter vessel.
Buying used nutsche filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new nutsche filters compare across key factors.
| Factor | Used from IPP | New (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new fabrication) |
| Materials | Stainless Steel 316, Stainless Steel Austenitic, Glasslined | Custom-specified |
| Pressure Ratings | 2 bar (29 psi) to 6 bar (87 psi) | Custom-built to specification |
| Manufacturers | Seitz-Werke, Wollner & Platz, JENS OLSEN and others | Single OEM |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver nutsche filters ready for your process.
Buying used nutsche filters from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Request a QuoteIn-stock nutsche filters from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.
Check AvailabilityIPP stocks nutsche filters from Seitz-Werke, Wollner & Platz, JENS OLSEN, Seitz and other manufacturers. Every unit is an original OEM product with traceable provenance.
Browse ManufacturersIPP offers refurbishment services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts.
Learn MoreIPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and the United States. IPP has served 160,000+ customers worldwide.
Find Nearest OfficeIPP stocks nutsche filters across a wide range of specifications to match your process requirements.
Talk to an ExpertThe process of purchasing used nutsche filters from IPP follows five steps, from specification to delivery.
Share your specifications: capacity, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.
IPP sends a detailed equipment data sheet with specifications, dimensions, condition report, and photographs.
Contact IPP to arrange an on-site visit or request a live video walkthrough with an IPP team member at one of our global locations.
IPP offers refurbishment services through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional services.
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries.
Answers to the most common questions from procurement and operations teams evaluating used nutsche filters.
IPP Group supplies new equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. IPP also offers re-glassed equipment through its UGE (Universal Glasteel Equipment) division.
Ask About New Equipment