Buying used rising and falling film evaporators through International Process Plants gives chemical, pharmaceutical, food, and environmental processors access to thin-film tubular evaporators that move liquid up or down heated tubes for high-efficiency evaporation with short residence time from Kleiser Gmbh, Buflovak/Blaw Knox, Pitton-Gessner/Germany, APV, Betchel, and other OEM manufacturers.
IPP stocks rising/falling film evaporators across multiple material options. Choose the material that matches your process requirements.
IPP stocks stainless steel rising and falling film evaporators in multiple grades including Stainless Steel 316, Austenitic, 304, and 321. Available from Kleiser Gmbh, Pitton-Gessner/Germany, APV, Buflovak/Blaw Knox, and other manufacturers.
Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area.
Used Swenson Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 294 m² (3,150 ft²) heat transfer surface area.
Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.
IPP stocks rising and falling film evaporators in carbon steel and graphite construction for corrosive-duty applications. Available from GESSNER and other manufacturers.
Used GESSNER carbon steel rising/falling film evaporator with 6.4 m² (69 ft²) heat transfer surface area and SS 321 tubes.
Used graphite rising/falling film evaporator with 7,400 kg/h (16,350 lb/h) evaporation rate, titanium centrifugal pumps, and fiberglass vapor bodies.
IPP stocks titanium rising and falling film evaporators suited for highly corrosive feed streams where stainless steel cannot maintain tube integrity. Available from Plant Maintenance Services Corp. (PMS) and Betchel.
Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.
Used Betchel 130T titanium rising/falling film evaporator with 18,150 kg/h (40,000 lb/h) evaporation rate, mechanical vapor recompression (MVR), and titanium tubes with titanium tubesheets.
IPP stocks rising and falling film evaporators from a wide range of manufacturers, with Kleiser Gmbh and Buflovak/Blaw Knox representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.
Kleiser Gmbh is the deepest single-manufacturer position in IPP's rising/falling film evaporator inventory. Available in Stainless Steel 316 and Stainless Steel Austenitic construction across used conditions.
Used Kleiser Gmbh Stainless Steel 316 rising/falling film evaporator with 9,400 kg/h (20,700 lb/h) evaporation rate, vacuum rated, with controls included.
Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 6,700 kg/h (14,750 lb/h) evaporation rate, vertical orientation, vacuum rated.
Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 66.5 m² (716 ft²) heat transfer surface area and 12 kg/h (26.5 lb/h) evaporation rate.
Buflovak/Blaw Knox is the second deepest OEM position in IPP's rising/falling film evaporator inventory. Available in Stainless Steel 316 and Stainless Steel 304 construction with multi-effect configurations.
Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area in a 2-effect configuration.
Used Buflovak/Blaw Knox Stainless Steel 304 rising/falling film evaporator with 9,550 kg/h (21,100 lb/h) evaporation rate and 392.1 m² (4,200 ft²) heat transfer surface area in a 2-effect configuration.
Used Buflovak/Blaw Knox Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 83.6 m² (900 ft²) heat transfer surface area.
Beyond Kleiser Gmbh and Buflovak/Blaw Knox, IPP stocks rising and falling film evaporators from Pitton-Gessner/Germany, APV, Betchel, Wiegand, DeSmet, Swenson, Paget Equipment, and other manufacturers. These units span laboratory-scale through large industrial-capacity duties.
Used APV Mitchell Stainless Steel 316 rising/falling film evaporator with 7,600 kg/h (16,800 lb/h) evaporation rate and 24.9 m² (268 ft²) heat transfer surface area.
Used Pitton-Gessner/Germany model 1.4571/H2 Stainless Steel Austenitic rising/falling film evaporator with 49.8 m² (536 ft²) heat transfer surface area, vacuum rated.
Used DeSmet Stainless Steel 316 rising/falling film evaporator with 1,350 kg/h (3,000 lb/h) evaporation rate and 18 m² (194 ft²) heat transfer surface area, vertical orientation.
IPP stocks rising and falling film evaporators in used condition. All units were previously installed in production service, inspected on intake, and are offered with traceable provenance at meaningful savings versus new OEM pricing.
Good used rising and falling film evaporators represent the full inventory position at IPP. These units were previously installed in production service, inspected on intake, and are offered as-is at meaningful savings while retaining OEM tube bundles, vapor bodies, and ancillary hardware.
Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.
Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.
Used Paget Equipment Stainless Steel 304 rising/falling film evaporator with 2,250 kg/h (5,000 lb/h) evaporation rate and 67.4 m² (725 ft²) heat transfer surface area.
Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new rising/falling film evaporators compare across key factors.
| Factor | Used from IPP | New (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new build) |
| Materials | Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 | Custom-specified |
| Pressure Ratings | 0.97 bar (14 psi) to 10.3 bar (150 psi) | Custom-built to specification |
| Manufacturers | Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox and others | Single OEM |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver rising/falling film evaporators ready for your process.
Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Request a QuoteIn-stock rising/falling film evaporators from IPP are ready to ship. IPP's GPS subsidiary also provides custom-built new equipment with 12–16 week average delivery.
Check AvailabilityIPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel and other manufacturers. Every unit is an original OEM product with traceable provenance.
Browse ManufacturersIPP offers refurbishment services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts.
Learn MoreIPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
Find Nearest OfficeIPP stocks rising/falling film evaporators across a wide range of specifications to match your process requirements.
Talk to a SpecialistThe process of purchasing used rising/falling film evaporators from IPP follows five steps, from specification to delivery.
Share your specifications: capacity, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.
IPP sends a detailed equipment data sheet with specifications, dimensions, condition report, and photographs.
Contact IPP to arrange an on-site visit or request a live video walkthrough with an IPP specialist at one of our global locations.
IPP offers refurbishment services through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional services.
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries.
Answers to the most common questions from procurement and operations teams evaluating used rising and falling film evaporators.
IPP Group supplies new equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom-built equipment with 12–16 week average delivery. IPP also offers re-glassed equipment through its UGE (Universal Glasteel Equipment) division.
Ask About New Equipment