Buying used spray dryers through International Process Plants gives pharmaceutical, food and dairy, and chemical manufacturers access to chamber dryers that atomize liquid feed into a hot gas stream for rapid powder production from Niro, Mazzoni, Bowen Engineering Inc, Tetre, and other OEM manufacturers.
IPP stocks spray dryers across multiple material options. Choose the material that matches your process requirements.
IPP stocks stainless steel spray dryers in multiple grades, including Stainless Steel 304, Stainless Steel 316, and Stainless Steel Other. Available from Niro, Tetre, Anhydro, APV Anhydro, and other manufacturers.
Used Niro FSD-0050-N stainless steel 316 spray dryer with 3,000 mm (118.1 in) drying chamber and 350 kg/h evaporation rate.
Used Niro stainless steel 304 spray dryer with 3,650 mm (143.7 in) drying chamber, rotary disc-wheel atomizer, and 544 kg/h evaporation rate.
Used Tetre Type 150 stainless steel 304 spray dryer with 2,500 mm (98.4 in) drying chamber and 160 kg/h evaporation rate.
IPP stocks additional spray dryers where the chamber material is not separately specified in the product record. Available from Niro, Mazzoni, Bowen Engineering Inc, and other manufacturers.
Used Bowen Engineering Inc Type CC spray dryer with 431.8 mm (17 in) chamber and rotary disc-wheel atomizer.
IPP stocks spray dryers from a wide range of manufacturers, with Niro and Mazzoni representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure, replacement parts, and operator familiarity.
Niro (GEA Niro) is the deepest single-manufacturer position in IPP's spray dryer inventory. Available model families include F10, F35H, F60, FSD, SD, TS, and Utility Unit chambers, all in used condition.
Used Niro FSD-0050-N stainless steel 316 spray dryer with 3,000 mm (118.1 in) chamber and 250 deg C inlet temperature.
Used Niro SD-25 N-R stainless steel 304 spray dryer with 3,400 mm (133.9 in) chamber and 435 deg C inlet temperature.
Used Niro Utility Unit stainless steel 304 spray dryer with 1,200 mm (47.2 in) chamber and single fluid pressure nozzle atomizer.
Mazzoni is a recurring OEM position in IPP's spray dryer inventory, with multiple units available in used condition. Mazzoni is well known to soap and oleochemical processors and is offered here on a quote basis.
IPP also stocks spray dryers from Tetre, Anhydro, APV Anhydro, and Bowen Engineering Inc. These OEMs cover sanitary food, dairy, flavor, and pharmaceutical drying duties.
Used Tetre Type 150 stainless steel 304 spray dryer with 2,500 mm (98.4 in) chamber and 8,000 m3/h air flow rate.
Used Anhydro III-A size #2 stainless steel 304 spray dryer with 2,400 mm (94.5 in) chamber and rotary disc-wheel atomizer.
Used Bowen Engineering Inc BE-1410 spray dryer with 800 mm (31.5 in) chamber, single fluid pressure nozzle, and 500 deg C inlet temperature.
Every spray dryer currently listed in IPP's inventory is offered in used condition. Refurbishment, inspection, and rebuild scopes can be quoted on request through the IPP team.
All spray dryer listings on IPP's inventory carry the Used condition label. Used units are available from Niro, Anhydro, APV Anhydro, Tetre, Bowen Engineering Inc, and Mazzoni.
Used APV Anhydro stainless steel 316 spray dryer with 1,250 mm (49.2 in) chamber, two fluid atomizing nozzle, and 354 deg C inlet temperature.
Used Niro stainless steel 304 spray dryer with 7,000 mm (275.6 in) chamber and 1,800 kg/h evaporation rate.
Used Anhydro type III-A no.4 stainless steel 304 spray dryer with 2,600 mm (102.4 in) chamber and rotary disc-wheel atomizer.
Buying used spray dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new spray dryers compare across key factors.
| Factor | Used from IPP | New (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new fabrication) |
| Materials | Stainless Steel 304, Stainless Steel 316, Stainless Steel Other | Custom-specified |
| Pressure Ratings | 1.3 bar (18.9 psi) | Custom-built to specification |
| Manufacturers | Niro, Mazzoni, Bowen Engineering Inc and others | Single OEM |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver spray dryers ready for your process.
Buying used spray dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Request a QuoteIn-stock spray dryers from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.
Check AvailabilityIPP stocks spray dryers from Niro, Mazzoni, Bowen Engineering Inc, Tetre and other manufacturers. Every unit is an original OEM product with traceable provenance.
Browse ManufacturersIPP offers refurbishment services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts.
Learn MoreIPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
Find Nearest OfficeIPP stocks spray dryers across a wide range of specifications to match your process requirements.
Talk to an ExpertThe process of purchasing used spray dryers from IPP follows five steps, from specification to delivery.
Share your specifications: capacity, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.
IPP sends a detailed equipment data sheet with specifications, dimensions, condition report, and photographs.
Contact IPP to arrange an on-site visit or request a live video walkthrough with an IPP team member at one of our global locations.
IPP offers refurbishment services through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional services.
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries.
Answers to the most common questions from procurement and operations teams evaluating used spray dryers.
IPP Group supplies new equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. IPP also offers re-glassed equipment through its UGE (Universal Glasteel Equipment) division.
Ask About New Equipment