Buying used porcupine dryers through International Process Plants gives chemical, wastewater, food, and biomass buyers access to indirect dryers that use a heated, paddle-studded rotor inside a jacketed trough to break up and dry sludges and wet solids continuously from Gale Process Solutions and other OEM manufacturers.
IPP stocks porcupine dryers in Stainless Steel 304 and Stainless Steel 316 construction. Choose the material that matches your process requirements.
IPP stocks Stainless Steel 316 porcupine dryers in used and unused conditions. Available from Gale Process Solutions.
Used Gale Process Solutions Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length.
Unused Gale Process Solutions Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length.
IPP stocks Stainless Steel 304 porcupine dryers for general-purpose and industrial drying applications. Available from Gale Process Solutions.
Used Gale Process Solutions Stainless Steel 304 dryer-porcupine. 1,050 mm (42 in) diameter x 3,050 mm (120 in) length with 2.6 m3 (90.8 ft3) total working volume.
IPP stocks porcupine dryers from Gale Process Solutions, a leading OEM for indirect thermal drying equipment. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.
Gale Process Solutions is the sole manufacturer represented in IPP's current porcupine dryer inventory. Available model families include the 1P4210 and 1P1203 series in used and unused conditions.
Used Gale Process Solutions 1P4210JTB Stainless Steel 304 dryer-porcupine with 2.6 m3 (90.8 ft3) total working volume and 44 m2 total heat transfer surface area.
Used Gale Process Solutions 1P1203JTC-S Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length.
Unused Gale Process Solutions 1P1203JTB Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length.
IPP stocks porcupine dryers in used and unused condition grades. Choose the condition that matches your budget, timeline, and performance requirements.
Good used porcupine dryers are the deepest condition position in IPP's porcupine dryer inventory. These units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining original OEM rotor and jacket hardware.
Used Gale Process Solutions 1P4210JTB Stainless Steel 304 dryer-porcupine with 1,050 mm (42 in) diameter, 3,050 mm (120 in) length, and 2.6 m3 (90.8 ft3) total working volume.
Used Gale Process Solutions 1P1203JTC-S Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length with 10.3 bar (150 psi) operating pressure.
Unused porcupine dryers were manufactured and delivered but never placed into service. These surplus units deliver new-equipment performance with immediate availability, typically at a discount versus ordering the same machine from the OEM.
Unused Gale Process Solutions 1P1203JTB Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length with 10.3 bar (150 psi) operating pressure.
Buying used porcupine dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new porcupine dryers compare across key factors.
| Factor | Used from IPP | New (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new OEM order) |
| Materials | Stainless Steel 316, Stainless Steel 304 | Custom-specified |
| Manufacturers | Gale Process Solutions and others | Single OEM |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver porcupine dryers ready for your process.
Buying used porcupine dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Request a QuoteIn-stock porcupine dryers from IPP are ready to ship. IPP's GPS subsidiary also supplies new custom-built equipment with 12–16 week average delivery.
Check AvailabilityIPP stocks porcupine dryers from Gale Process Solutions and other manufacturers. Every unit is an original OEM product with traceable provenance.
Browse ManufacturersIPP offers refurbishment services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts.
Learn MoreIPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
Find Nearest OfficeIPP stocks porcupine dryers across a wide range of specifications to match your process requirements.
Request SpecsThe process of purchasing used porcupine dryers from IPP follows five steps, from specification to delivery.
Share your specifications: capacity, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.
IPP sends a detailed equipment data sheet with specifications, dimensions, condition report, and photographs.
Contact IPP to arrange an on-site visit or request a live video walkthrough at one of our global locations.
IPP offers refurbishment services through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional services.
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries.
Answers to the most common questions from procurement teams evaluating used porcupine dryers.
IPP Group supplies new equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom-built equipment with 12–16 week average delivery. IPP also offers re-glassed equipment through its UGE (Universal Glasteel Equipment) division.
Ask About New Equipment