Buying used holoflite and screw dryers through International Process Plants gives chemical processing, wastewater treatment, mining, and pharmaceutical buyers access to indirect-heat dryers that use screws to convey and thermally process bulk solids in a single enclosed trough from Joy Denver, Svedala, Hi Line Industries, Reitz, Denver Equipment, Thies Kg Coesfeld Gmbh, and other OEM manufacturers.
IPP stocks holoflite and screw dryers in carbon steel and multiple stainless steel grades. The material of construction determines corrosion resistance, maximum operating temperature, and compatibility with the product being dried.
Carbon steel is the deepest material position in IPP's holoflite and screw dryer inventory. Available from Joy Denver and Svedala, these units suit general industrial drying where elevated corrosion resistance is not required.
Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.
Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and hot-oil heating medium.
Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area.
IPP stocks stainless steel holoflite and screw dryers in 316, 304, and 316L grades. Available from Denver Equipment, Thies Kg Coesfeld Gmbh, Hi Line Industries, and Reitz for corrosion-sensitive or sanitary drying applications.
Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.
Used Thies Kg Coesfeld Gmbh 2 V 410-24 stainless steel 316 holoflite and screw dryer with twin-screw design rated for 50 °C (122 °F) internal temperature.
Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.
IPP stocks holoflite and screw dryers from six OEM manufacturers, with Joy Denver and Svedala representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.
Joy Denver is the deepest single-manufacturer position in IPP's holoflite and screw dryer inventory. Available models include the D-2420-6 quad-screw processor and the D12-20-5 single-screw unit, all in carbon steel construction.
Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area, rated for 5.5 bar (80 psi) at 343.3 °C (650 °F).
Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.
Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area and 2.1 bar (30 psi) jacket pressure.
Svedala is the second deepest OEM position in IPP's holoflite and screw dryer inventory. Available units include the Q2424-6 quad-screw processor series in carbon steel construction with hot-oil heating medium.
Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.
Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.
Used Svedala carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.
Beyond Joy Denver and Svedala, IPP stocks holoflite and screw dryers from Hi Line Industries, Reitz, Denver Equipment, and Thies Kg Coesfeld Gmbh. These units span stainless steel grades for corrosion-sensitive and sanitary drying duties.
Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.
Used Hi Line Industries 2155M25 stainless steel 316 holoflite and screw dryer with single-screw configuration rated for 1.03 bar (14.9 psi) at 148.9 °C (300 °F).
Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.
All holoflite and screw dryers currently in IPP's inventory are in used condition. Used units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining original OEM screw and drive hardware.
All holoflite and screw dryers in IPP's current inventory are in good used condition. These units were previously installed in production service and retain their original OEM hollow-flight screws, trough bodies, drive assemblies, and heating jackets.
Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.
Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.
Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.
Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new holoflite & screw dryers compare across key factors.
| Factor | Used from IPP | New (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new manufacturing) |
| Materials | Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L | Custom-specified |
| Pressure Ratings | 0.005 bar (0.07 psi) to 5.5 bar (80 psi) | Custom-built to specification |
| Manufacturers | Joy Denver, Svedala, Hi Line Industries and others | Single OEM |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver holoflite & screw dryers ready for your process.
Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Request a QuoteIn-stock holoflite & screw dryers from IPP are ready to ship. IPP's GPS subsidiary also provides custom-manufactured new equipment with 12–16 week average delivery.
Check AvailabilityIPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz and other manufacturers. Every unit is an original OEM product with traceable provenance.
Browse ManufacturersIPP offers refurbishment services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts.
Learn MoreIPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
Find Nearest OfficeIPP stocks holoflite & screw dryers across a wide range of specifications to match your process requirements.
Talk to a SpecialistThe process of purchasing used holoflite & screw dryers from IPP follows five steps, from specification to delivery.
Share your specifications: capacity, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.
IPP sends a detailed equipment data sheet with specifications, dimensions, condition report, and photographs.
Contact IPP to arrange an on-site visit or request a live video walkthrough with an IPP specialist at one of our global locations.
IPP offers refurbishment services through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional services.
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries.
Answers to the most common questions from procurement and operations teams evaluating used holoflite and screw dryers.
IPP Group supplies new equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom-manufactured equipment with 12–16 week average delivery. IPP also offers re-glassed equipment through its UGE (Universal Glasteel Equipment) division.
Ask About New Equipment