Buying used manual discharge-top basket centrifuges through International Process Plants gives pharmaceutical, chemical, food and beverage, and specialty manufacturing buyers access to perforated-basket separators where the operator manually removes the solids cake from the top of the basket after each spin cycle from Heine, Krauss Maffei, Ferrum, Alfa Laval, Ellerwerk, and other OEM manufacturers.
IPP stocks manual discharge-top basket centrifuges across multiple material options. Choose the material that matches your process requirements.
IPP stocks stainless steel manual discharge-top basket centrifuges in SS 316, SS 316L, SS 304, Austenitic, and other grades. Available from Heine, Ferrum, Krauss Maffei, Alfa Laval, Ellerwerk, and other manufacturers.
New Gale Process Solutions SI-2 stainless steel 316 basket centrifuge with 1,200 mm (48 in) basket diameter, 2.3 m² filtration area, and sanitary construction.
Used Krauss Maffei VZO 125/3.2 stainless steel 316 basket centrifuge with 1,250 mm (49.2 in) basket diameter, 3.2 m² filtration area, and gas-tight housing.
Used Ferrum POR-1250 stainless steel 316 basket centrifuge with 1,250 mm (49.2 in) basket diameter, 2.4 m² filtration area, and G Force of 630.
IPP stocks rubberlined manual discharge-top basket centrifuges for corrosive or abrasive separation duties. Available from Krauss Maffei, Heine, and other manufacturers.
Used Krauss Maffei DZU-125/3.2 rubberlined basket centrifuge with 1,250 mm (49.2 in) basket diameter, 3.2 m² filtration area, and plow-assisted discharge.
Used Heine 342 rubberlined basket centrifuge with 1,250 mm (49.2 in) basket diameter, 1.96 m² filtration area, and gas-tight housing.
Refurbished/rebuilt Krauss Maffei rubberlined basket centrifuge with 1,200 mm (48 in) basket diameter and 850 RPM maximum speed.
IPP stocks Hastelloy manual discharge-top basket centrifuges in C-4, C-276, B, and other alloy grades for highly corrosive separation processes. Available from GFT Trenntechnik, Heine, Tolhurst, and other manufacturers.
Used GFT Trenntechnik V63-U Hastelloy basket centrifuge with 630 mm (24.8 in) basket diameter, 0.63 m² filtration area, and plow-assisted discharge.
Used Heine 338 Hastelloy C-4 basket centrifuge with 800 mm (31.5 in) basket diameter and 1,500 RPM maximum speed.
Refurbished/rebuilt Tolhurst H-1211 Hastelloy C-276 basket centrifuge with 1,200 mm (48 in) basket diameter and plow-assisted discharge.
IPP stocks manual discharge-top basket centrifuges in Alloy 926, Lined, Monel, Stainless Steel 304, and other specialty materials. Available from Krauss Maffei, Alfa Laval, Tolhurst, and other manufacturers.
Used Krauss Maffei VZO 125/3.2C Alloy 926 basket centrifuge with 1,250 mm (49.2 in) basket diameter, 3.2 m² filtration area, and gas-tight housing.
Used Alfa Laval PAZ1000CX500 lined basket centrifuge with 1,000 mm (40 in) basket diameter, plow-assisted discharge, and controls included.
IPP stocks manual discharge-top basket centrifuges from a wide range of manufacturers, with Heine and Krauss Maffei representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and operator familiarity.
Heine is the deepest single-manufacturer position in IPP's manual discharge-top basket centrifuge inventory. Available model families include the 336, 338, 342, FV, and d-FU series in used and refurbished/rebuilt conditions.
Used Heine stainless steel 316 basket centrifuge with 813 mm (32 in) basket diameter and 1,000 RPM maximum speed.
Used Heine stainless steel 316 basket centrifuge with 1,000 mm (39.4 in) basket diameter, 1,200 RPM maximum speed, and plow-assisted discharge.
Refurbished/rebuilt Heine d-FU1000/400/470 stainless steel 316 basket centrifuge with 1,000 mm (40 in) basket diameter and 200 kg load capacity.
Krauss Maffei is the second deepest OEM position in IPP's manual discharge-top basket centrifuge inventory. Available model families include the PZO, VZO, and DZU series in stainless steel 316, rubberlined, and alloy 926 construction.
Used Krauss Maffei VZO 125/2.5 S stainless steel 316 basket centrifuge with 1,250 mm (49.2 in) basket diameter, 2.5 m² filtration area, and gas-tight housing.
Used Krauss Maffei PZO 120 stainless steel 316 basket centrifuge with 1,200 mm (47.2 in) basket diameter and 500 mm (19.7 in) basket depth.
Used Krauss Maffei DZU-125/3.2 rubberlined basket centrifuge with 1,250 mm (49.2 in) basket diameter, 3.2 m² filtration area, and controls included.
Beyond Heine and Krauss Maffei, IPP stocks manual discharge-top basket centrifuges from Ferrum, Alfa Laval, Ellerwerk, Tolhurst, Rousselet Robatel, Broadbent, and other manufacturers. These units cover pharmaceutical, chemical, and general-purpose industrial separation duties.
Refurbished/rebuilt Ferrum J8P-S stainless steel 316 basket centrifuge with 800 mm (31.5 in) basket diameter, 0.9 m² filtration area, and sanitary construction.
Used Alfa Laval PAZ 1250 C stainless steel 316 basket centrifuge with 1,250 mm (49.2 in) basket diameter, 1.96 m² filtration area, and gas-tight housing.
Used Ellerwerk 736 C-T stainless steel 316 basket centrifuge with 1,250 mm (49.2 in) basket diameter and plow-assisted discharge.
IPP stocks manual discharge-top basket centrifuges in used, refurbished/rebuilt, unused, and new condition grades. Choose the condition that matches your budget, timeline, and performance requirements.
Good used manual discharge-top basket centrifuges represent the deepest condition position in IPP's inventory. These units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining OEM basket and drive hardware.
Used Ellerwerk 734 C stainless steel austenitic basket centrifuge with 800 mm (31.5 in) basket diameter and 2,300 RPM maximum speed.
Used DeLaval 48x24 Mark III stainless steel 316 basket centrifuge with 1,200 mm (48 in) basket diameter, 1,150 RPM maximum speed, and plow-assisted discharge.
Used Ferrum POR800HP stainless steel 316 basket centrifuge with 800 mm (31.5 in) basket diameter and gas-tight housing.
Refurbished/rebuilt manual discharge-top basket centrifuges have been professionally restored by IPP or the original manufacturer. These units offer near-new performance at a lower cost than factory-fresh equipment.
Refurbished/rebuilt Heine d-FU1000/400/470 stainless steel 316 basket centrifuge with 1,000 mm (40 in) basket diameter.
Refurbished/rebuilt Heine stainless steel 316 basket centrifuge with 850 mm (33.5 in) basket diameter and 1,300 RPM maximum speed.
Refurbished/rebuilt Rousselet Robatel OCS stainless steel 316 basket centrifuge with 1,200 mm (47.2 in) basket diameter, 1.88 m² filtration area, and G Force of 377.
Unused manual discharge-top basket centrifuges are factory-built units that were never installed or operated. These units offer new-equipment performance at a reduced price versus ordering directly from the OEM.
Unused Sangerhausen FZPO850 stainless steel 316 basket centrifuge with 850 mm (33.5 in) basket diameter and 960 RPM maximum speed.
Unused Sangerhausen FZPO-850-C stainless steel 316 basket centrifuge with 850 mm (33.5 in) basket diameter and 960 RPM maximum speed.
IPP supplies new manual discharge-top basket centrifuges through its Gale Process Solutions (GPS) subsidiary. New units are built to order with custom specifications and delivered within standard lead times.
New Gale Process Solutions SI-2 stainless steel 316 basket centrifuge with 1,200 mm (48 in) basket diameter, 2.3 m² filtration area, sanitary construction, and dynamic braking.
Buying used manual discharge-top basket centrifuges from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new manual discharge-top basket centrifuges compare across key factors.
| Factor | Used from IPP | New (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new fabrication) |
| Materials | Stainless Steel 316, Stainless Steel Austenitic, Rubberlined, Alloy 926 | Custom-specified |
| Manufacturers | Heine, Krauss Maffei, Ferrum and others | Single OEM |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver manual discharge-top basket centrifuges ready for your process.
Buying used manual discharge-top basket centrifuges from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Request a QuoteIn-stock manual discharge-top basket centrifuges from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.
Check AvailabilityIPP stocks manual discharge-top basket centrifuges from Heine, Krauss Maffei, Ferrum, Alfa Laval and other manufacturers. Every unit is an original OEM product with traceable provenance.
Browse ManufacturersIPP offers refurbishment services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts.
Learn MoreIPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
Find Nearest OfficeIPP stocks manual discharge-top basket centrifuges across a wide range of specifications to match your process requirements.
Discuss SpecificationsThe process of purchasing used manual discharge-top basket centrifuges from IPP follows five steps, from specification to delivery.
Share your specifications: capacity, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.
IPP sends a detailed equipment data sheet with specifications, dimensions, condition report, and photographs.
Contact IPP to arrange an on-site visit or request a live video walkthrough at one of our global locations.
IPP offers refurbishment services through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional services.
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries.
IPP supplies used manual discharge-top basket centrifuges to manufacturers across multiple process industries worldwide.
Answers to the most common questions from procurement teams evaluating used manual discharge-top basket centrifuges.
IPP Group supplies new equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. IPP also offers re-glassed equipment through its UGE (Universal Glasteel Equipment) division.
Ask About New Equipment